CollectEject™ Blade Swab
- Layered cotton absorbs and extracts well
- Ejectable head simplifies sample transfer
- Designed for surface sample collection
The CollectEject Blade Swab is designed to maximize the collection and extraction of a surface sample. Cotton has proven to be the most absorbent material for sample collection, but most cotton swabs are spun and therefore trap the sample and are difficult to extract the sample. The layered cotton design of the CollectEject Blade Swab opens up as the wet cotton expands. The open layers of the swab collect well on porous or non-porous surface with a dabbing action rather than scrubbing. Placing the CollectEject Blade Swab back into the wrapper and then into a GenDry™ Pouch, will dry the sample while the layers are still in the open position. This expedites the drying and most extraction protocols to fully extract the sample from the swab.
Protocol
The wrapper has an arrow that says “peel here” indicating where to open the wrapper by peeling apart the layers about three quarters of the way down where there are arrows saying “Peel to here”. Remove the CollectEject Blade Swab by holding the white portion of the handle. Be sure not to hold the green section on the end. Save the wrapper.
We recommend a wet/dry collection using a CollectEject Blade Swab with a drop of sterile water followed by a dry swab. After wetting the swab place it onto the surface you ant to collect the sample. Use a more dapping approach rather than a scrubbing approach. Going in a circular motion is also recommended. If the surface is not flat, be sure to follow the contour of the surface.
Please the swab back in its original wrapper and place the wrapped swab into a GenDry™ Pouch for transport to the lab for processing and repeat using a second dry CollectEject Blade Swab.
| Cat. No. | Quantity |
|---|---|
G-2077-100 | 100 / box |
G-2077-CS1000 | 1000 / case |
To receive email releases, simply provide
us with your email below
Our Contacts
- Get directions on the map
- CIN:- U51397DL1997PTCO88421
GSTIN:- 07AABCT1579R1ZN - +91-11-24636224 / 223
+91-8130290311 (WhatsApp Only) - sales@technoconcept.co.in