The DigiTrol II features a digital dual output display for set point and process temperature indication. The automatic-tuning feature ensures increased temperature accuracy with minimum overshoot.

Easy set-up and simple input commands make this control very "user friendly." The load and the thermocouple receptacles are located on the front panel for easy accessibility. Features automatic cold junction compensation and thermocouple break protection. Furnished with an immersion thermocouple with 15.2cm - long stainless-steel probe.

Control: PID parameters with auto tune algorithm
Accuracy: 0.1% of span, +/- 1.0?C
Display: LED process/setpoint
Calibration: °F or °C display, user selectable
Resolution: 1°, 1.0° or 1.00°
Environment: 0 to 149°F / -18 to 65°C; 0 to 90% RH, non-condensing
Solid state relay
Housing: 20.3cm x 15.2cm x 8.6cm 

240V, CE Furnished with 2.5-meter cord and CEE 7/7 plug.
240V Furnished with 1.2-meter cord and locking connector

Generate catalog for :